method machining for control flatness 0.03mm (milling)?
Written by Josh on November 3, 2008 – 1:45 am -
I AL6061 material formed from 12.7 mm x127×600 grinding to graduate 12×120x600mm according to the measure, but the need? of important things to check? the planarit? 0.03mm method / process to achieve this critrial?
Tags: Al6061, Control, Machining
Posted in FAQs |
By fletchermse on Nov 3, 2008 | Reply
If the can 'worker, and t he does, will be shining? necessary.
By harbourbug on Nov 5, 2008 | Reply
.03 Mm = .0011 "reasonably close to that big of an area. Assume you are referring to T.I.R. (Total rdg indicated) through the entire surface of the pot. This accuracy can be achieved using a "planetary; lapping process. The wrap also make the perpendicularity of both sides of the plate. There are shops that specialize in this type of finish. Ensuring that all work, welding or any other heat treatment and remove material are complete before groped to achieve your spec. of flatness.