Home » FAQs » i want to know.why different cutting path using cnc milling will produce different total time?
i want to know.why different cutting path using cnc milling will produce different total time?
Written by Josh on August 4, 2009 – 2:16 am -
- CNC milling machine - The location of the cut will produce different total time of manufacture - that the path will cut the fastest time of manufacture?
Tags: Cnc Machine, Cnc Milling, Milling Machine
Posted in FAQs |
By minootoo on Aug 6, 2009 | Reply
The line of the Strait between two points is the shortest distance to ask for less time. But most important thing here is to make sure that you are not wasting your time and select the gear changing gear and even time travel, to do so all these things should be considered in the design of work and could make a big difference in total time machine worked out a workpiece. Block can spend lot of time so that on a mass production you must have a diameter of locking onto a virtual figure so the blocking time is reduced significantly.
By Paul on Aug 7, 2009 | Reply
most of the time savings, on used to reduce waste so nest, organize courses in fashion from we are wasting efforts and minimum are minimized so as to avoid the deformations. INTURNO savings of as much time in the later stage of production.
By pplsag on Aug 8, 2009 | Reply
As previously straight lines and that is the shortest distance, thus requiring less time. Moreover, the complicated or round shapes need more time or declaration of acceleration, thus making them longer. The wasted time and schedule may also come into play. You may want to consider stronger / best cutters, remove more material, to reduce the time you cut. This does not work for all, but in most cases, it 'better sense of SA go, I hope that this aid. Also suggest you take all Replays and advice and I consider them all good points.