What kind of CNC milling machine do I need?
Written by Josh on April 24, 2009 – 7:24 am -I have to work the machine rolls - many of them - about two and half-inch diameter and length of about 8 inches (spec. are quite real close, with spec. Additional finishing and perpendicularity surfaces with dimensions). The material is a ceramic, soft as ceramics go. We begin with a maximum cylinder surdimensionato and now their work in a multi-degrees on a saw ceramic (out of maximum length) and two lathes (one for diameters, another for finishing conclusion), but we & # 039 to the machine, the d Gradica make the whole process in a machine. I think we can do it with a CNC mill, but I don 't know enough about them to know what to look for in a machine. Can someone speak of opinion? Read More →
Tags: Cnc Mill, Diameter, Milling Machine
Posted in FAQs | 1 Comment »
I need an operation manual for a CNC milling center?
Written by Josh on March 27, 2009 – 5:28 am -The model is a vigorous rolling mill CNC VMC-A760. A "How to operate this machine for Dummies" books would! Read More →
Tags: Cnc Mill, Dummies Book, Vmc
Posted in FAQs | 1 Comment »
CNC or Mill machine shop in or REALLY close to spring?
Written by Josh on December 30, 2008 – 1:33 am -I 'm seeking a shop in or near 77,380 spring using machines similar to a compucarve (preferably to an industrial level) Read More →
Tags: Cnc Mill, Original Art, Thanks In Advance
Posted in FAQs | 1 Comment »
Can you machine laminated shim sheets (aluminum @1/8″ thk) with standard equipment, CNC mill, waterjet, drill.
Written by Josh on November 17, 2008 – 2:18 pm -limitations? concerns? Read More →
Tags: Aluminum, Cnc Mill, Thk
Posted in FAQs | 1 Comment »